Immersion Heated Ceramic Galvanizing Kettle, Immersion Heaters for Hot-dip Galvanizing, Galvanizing Line

The electronic control system and temperature control system of the immersion heated ceramic galvanizing kettle come with a temperature display for both the heater and zinc fluid.

The wire is made of premium nichrome wire which features high electric resistance and thermal resistance. The highest working temperature could reach 800℃, effectively ensuring the desirable heating performance and service life.

Since the founding of our company in 1998, this kind of galvanizing equipment has not only occupied most of the market share in the industry of hot dip galvanizing for fastener, but also been exported to many countries...

The nozzle controller will transfer the real-time signals to the remote control system which in return can activate the ignition, flame detection, signal treatment, and system operation.

As a galvanizing equipment supplier, our R&D department and technology department comprise with several famous experts on the steel wire galvanizing line, and experienced engineering technicians.

As a piece of structural steel galvanizing equipment, it can galvanize a variety of structural steel parts, such as transmission tower, microwave tower, utility pole, lighting mast, road side ...

Our fastener/electrical fitting galvanizing line can be used as either an excellent fastener galvanizing equipment or an electrical fitting galvanizing equipment. It has been widely recognized by our...

As a professional galvanizing solution provider, GONGDA can design semi-automatic galvanizing unit for similar cast iron parts, such as steel cap for the electric industry. The drying, galvanizing ...

GONGDA is one of the famous plating equipment suppliers in China. Our automatic steel pipe galvanizing line features high automation degree, PLC control system, and fluted disc galvanizing method.

The GD-PIRE flux regenerating equipment is an advanced auxiliary equipment for galvanizing. It has been widely used for the pretreatment of steel wire, steel tube, and structural steel, because it can...

The control system of our waste acid recovery system is quite user-friendly. An interlocking device is available for the monitoring of temperature, pressure, fluid weight, and flow rate, making the usage and inspection quite convenient.

The sodium hydroxide is used in this waste acid fume scrubber as the neutralization solution to react with the acid fumes. The fume absorption rate is above 95%. We adopt the anti-corrosive PP material or glass fiber reinforced...

As a pollutant filter for galvanizing, this filting device can effectively remove the pollutants in the fume. To improve the working environment in the workshop and match the related environmental protection standards, you can install our fume...

Generally, 400~700 Kg zinc can be recovered from 1 ton of zinc ash, depending on the zinc concentration in the zinc ash. Specifically, for the zinc ash from the hot-dip galvanization of cable bridge and iron tower parts, our zinc ash...

As zinc pumps for galvanizing line, the main parts of the pumps, like vane wheel, shell, and seal cartridge, etc. are made of special steel alloy which can resist the corrosion of the zinc. So the pump can effectively control the flow rate...

To make our centrifuge machines for fastener galvanizing more cost-effective, we have made a lot of efforts to lower the zinc consumption, labor cost, and labor intensity.

As a kind of auxiliary equipment for galvanization, it can dry small galvanized fasteners, casting iron parts, steel nails, and so on.

As a kind of efficient wiping machine for galvanization, it can control the surface smoothness and zinc layer thickness precisely just by adjusting the electric field intensity...

Our nitrogen gas wiping equipment for steel wire hot-dip galvanizing lines can precisely control the zinc coating thickness on the hot-dip galvanized steel wire without any physical contact.

The Galfan coated steel wire has smooth surface, great adhesion performance, desirable mechanical performance, and stable product quality.

The silicon nitride and silicon carbide are adopted to improve the anti-corrosion performance and service life. By rigid calculation and dynamic simulation designing...

Our zinc corrosion resistant thermocouples for galvanizing come with corrosion resistant coat made of rare earth alloy. So the thermocouples have great zinc corrosion resistance and heat conductivity.

Our acid and alkali resistant fluid heaters can be used for heating various corrosive fluids like the acid and alkali in the degrease bath and acid rinse bath of a galvanizing line.